![]() |
Wenn die Funde nochmal kommen NICHT LÖSCHEN, melde dich dann hier wieder mit einem FRST Logfile. Ich will mal was kontrollieren. |
Hallo Schrauber, ich hab das jetzt nochmal ausprobiert. Gestern hab ich MWB laufen lassen, da hat es wieder den Broken.OpenCommand gefunden. Dann die zwei Funde in Quatantäne gestellt und Auswahl anwenden geklickt. Neustart. Erneut MWB laufen lassen, es wurde dann kein Fund mehr festgestellt. Ein paar Minuten ebay surfen, Rechner aus. Heute Rechner an und MWB wieder laufen lassen. Erneut genau das gleiche gefunden. Jetzt wie gewünscht MWB ohne Quarantäne abgebrochen und FRST laufen lassen. Hier das Log dazu: Gruß Funcopter FRST Logfile: Code: Scan result of Farbar Recovery Scan Tool (FRST) (x86) Version:29-06-2014 |
Drücke bitte die Windowstaste + R Taste und schreibe notepad in das Ausführen Fenster. Kopiere nun folgenden Text aus der Code-Box in das leere Textdokument Code: HKLM\...\Run: [nwiz] => nwiz.exe /install Speichere diese bitte als Fixlist.txt auf deinem Desktop (oder dem Verzeichnis in dem sich FRST befindet).
Nochmal testen. |
Hallo Schrauber, erledigt. Gruß Funcopter Fix result of Farbar Recovery Tool (FRST written by Farbar) (x86) Version:29-06-2014 Ran by Roland at 2014-07-03 16:18:30 Run:1 Running from C:\Dokumente und Einstellungen\Roland\Desktop Boot Mode: Normal ============================================== Content of fixlist: ***************** HKLM\...\Run: [nwiz] => nwiz.exe /install HKLM\...\Run: [ApnTBMon] => C:\Programme\AskPartnerNetwork\Toolbar\Updater\TBNotifier.exe [1956760 2014-06-23] (APN) HKLM\...\Runonce: [SMRequiresRestart] - [X] BootExecute: autocheck autochk /p \??\J:autocheck autochk /p \??\K:autocheck autochk * R2 AAV UpdateService; C:\Programme\AAVUpdateManager\aavus.exe [128296 2008-10-24] () C:\Programme\AAVUpdateManager ***************** HKLM\Software\Microsoft\Windows\CurrentVersion\Run\\nwiz => value deleted successfully. HKLM\Software\Microsoft\Windows\CurrentVersion\Run\\ApnTBMon => value deleted successfully. HKLM\Software\Microsoft\Windows\CurrentVersion\RunOnce\\SMRequiresRestart => Value not found. HKLM\System\CurrentControlSet\Control\Session Manager\\BootExecute => Value was restored successfully. AAV UpdateService => Service stopped successfully. AAV UpdateService => Service deleted successfully. C:\Programme\AAVUpdateManager => Moved successfully. ==== End of Fixlog ==== |
Noch Probleme? |
Hallo Schrauber, Problem unverändert noch da. Ich habe heute einen MWB Suchlauf gemacht mit dem Ergebniss wie immer. Gruß Funcopter |
Ich glaub da ja eher an einen Fehlalarm von MBAM. Poste mal bitte en frisches FRST log. |
Hallo Schrauber, hier das Log: FRST Logfile: Code: Scan result of Farbar Recovery Scan Tool (FRST) (x86) Version:05-07-2014 01 Gruß Funcopter |
Was macht die Geschwindigkeit des Rechners? |
Hallo Schrauber, ist unverändert langsam. Die rote LED leuchtet nahezu ununterbrochen und er "rattert" permanent. Gruß Funcopter |
Festplatte schon auf Hardwaredefekt geprüft? |
Hallo Schrauber, verrätst Du mir auch wie ich die überprüfen kann?:killpc: Gruß Funcopter |
Versuch mal das Tool von Seatools :) |
Hallo Schrauber, das Seatool hat nicht funktioniert. Ich habe mir das GSmartControl runtergeladen und drüber laufen lassen. Ich hoffe das war jetzt nicht falsch. Die erste Festplatte hat 1760 Fehler im Laufe von 12244 Betriebsstunden gezählt und die zweite 61246 im Laufe von 54096 Stunden. Ob ein aktueller Fehler da drauf ist kann ich aus derm Log nicht sehen. Vielleicht siehst Du da ja was. Hier die zugehörigen Logs: Gruß Funcopter Complete error log: SMART Error Log Version: 1 ATA Error Count: 1760 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1760 occurred at disk power-on lifetime: 12244 hours (510 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 5f 00 00 e0 Error: ICRC, ABRT at LBA = 0x0000005f = 95 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 7f 5f 00 00 e0 00 00:01:34.647 READ DMA c8 00 7f 5f 00 00 e0 00 00:01:34.194 READ DMA 10 00 ff 00 00 00 e0 00 00:01:34.194 RECALIBRATE [OBS-4] c8 00 7f 5f 00 00 e0 00 00:01:33.759 READ DMA c8 00 7f 5f 00 00 e0 00 00:01:33.264 READ DMA Error 1759 occurred at disk power-on lifetime: 12244 hours (510 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 5f 00 00 e0 Error: ICRC, ABRT at LBA = 0x0000005f = 95 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 7f 5f 00 00 e0 00 00:01:34.194 READ DMA 10 00 ff 00 00 00 e0 00 00:01:34.194 RECALIBRATE [OBS-4] c8 00 7f 5f 00 00 e0 00 00:01:33.759 READ DMA c8 00 7f 5f 00 00 e0 00 00:01:33.264 READ DMA c8 00 01 3f 00 00 e0 00 00:01:33.263 READ DMA Error 1758 occurred at disk power-on lifetime: 12244 hours (510 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 5f 00 00 e0 Error: ICRC, ABRT at LBA = 0x0000005f = 95 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 7f 5f 00 00 e0 00 00:01:33.759 READ DMA c8 00 7f 5f 00 00 e0 00 00:01:33.264 READ DMA c8 00 01 3f 00 00 e0 00 00:01:33.263 READ DMA c8 00 01 25 0d cb e2 00 00:01:32.545 READ DMA c8 00 01 00 00 00 e0 00 00:01:32.545 READ DMA Error 1757 occurred at disk power-on lifetime: 12244 hours (510 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 5f 00 00 e0 Error: ICRC, ABRT at LBA = 0x0000005f = 95 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 7f 5f 00 00 e0 00 00:01:33.264 READ DMA c8 00 01 3f 00 00 e0 00 00:01:33.263 READ DMA c8 00 01 25 0d cb e2 00 00:01:32.545 READ DMA c8 00 01 00 00 00 e0 00 00:01:32.545 READ DMA c8 00 01 00 00 00 e0 00 00:01:32.545 READ DMA Error 1756 occurred at disk power-on lifetime: 7622 hours (317 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 c7 00 00 e0 Error: ICRC, ABRT at LBA = 0x000000c7 = 199 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 c7 00 00 e0 00 00:00:32.113 READ DMA c8 00 08 bf 00 00 e0 00 00:00:32.113 READ DMA c8 00 08 b7 00 00 e0 00 00:00:32.113 READ DMA c8 00 08 af 00 00 e0 00 00:00:32.112 READ DMA c8 00 08 a7 00 00 e0 00 00:00:32.112 READ DMA Complete error log: SMART Error Log Version: 1 Warning: ATA error count 61246 inconsistent with error log pointer 5 ATA Error Count: 61246 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 61246 occurred at disk power-on lifetime: 54096 hours (2254 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 00 01 01 00 00 a0 00 35d+17:42:08.640 IDENTIFY PACKET DEVICE c8 00 08 77 a5 34 e1 00 29d+16:53:44.320 READ DMA 08 00 01 01 00 00 a0 00 35d+17:42:08.640 DEVICE RESET 00 00 01 01 00 00 00 00 40d+09:28:39.680 NOP [Abort queued commands] e0 00 00 00 00 00 a0 00 29d+16:53:44.320 STANDBY IMMEDIATE Error 61245 occurred at disk power-on lifetime: 54096 hours (2254 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 01 00 00 a0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 08 00 01 01 00 00 a0 00 35d+17:42:08.640 DEVICE RESET 00 00 01 01 00 00 00 00 40d+09:28:39.680 NOP [Abort queued commands] e0 00 00 00 00 00 a0 00 29d+16:53:44.320 STANDBY IMMEDIATE c8 00 40 91 a7 2c e1 00 29d+16:53:44.320 READ DMA c8 00 08 77 a5 34 e1 00 29d+16:53:44.320 READ DMA Error 61244 occurred at disk power-on lifetime: 53584 hours (2232 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 00 01 01 00 00 a0 00 35d+17:42:08.640 IDENTIFY PACKET DEVICE c8 00 08 47 31 e3 e0 00 34d+08:01:57.760 READ DMA 08 00 01 01 00 00 a0 00 35d+17:42:08.640 DEVICE RESET 00 00 01 01 00 00 00 00 40d+09:28:39.680 NOP [Abort queued commands] e0 00 00 00 00 00 a0 00 34d+08:01:57.760 STANDBY IMMEDIATE Error 61243 occurred at disk power-on lifetime: 53584 hours (2232 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 01 00 00 a0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 08 00 01 01 00 00 a0 00 35d+17:42:08.640 DEVICE RESET 00 00 01 01 00 00 00 00 40d+09:28:39.680 NOP [Abort queued commands] e0 00 00 00 00 00 a0 00 34d+08:01:57.760 STANDBY IMMEDIATE c8 00 08 97 36 8f e0 00 34d+08:01:57.760 READ DMA c8 00 08 47 31 e3 e0 00 34d+08:01:57.760 READ DMA Error 61242 occurred at disk power-on lifetime: 53072 hours (2211 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 01 01 00 00 a0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 00 01 01 00 00 a0 00 35d+17:42:08.640 IDENTIFY PACKET DEVICE 08 00 01 01 00 00 a0 00 35d+17:42:08.640 DEVICE RESET 00 00 01 01 00 00 00 00 40d+09:28:39.680 NOP [Abort queued commands] e0 00 00 00 00 00 a0 00 48d+03:54:28.480 STANDBY IMMEDIATE c8 00 08 af 40 00 e1 00 48d+03:54:28.480 READ DMA |
Welcher Hersteller ist die Platte? Vielleicht gibt es ein Hersteller Tool zum Testen. |
Alle Zeitangaben in WEZ +1. Es ist jetzt 07:25 Uhr. |
Copyright ©2000-2025, Trojaner-Board